The Texas Department of Transportation (TxDOT) has reduced the load limit on the Yale Street Bridge just south of Interstate 10 from 8,000 lbs. per single axle to 3,000 lbs. per single axle. A standard passenger car with two single axles and a maximum weight of 6,000 lbs. (3,000 lbs. x 2 axles) would meet the new limit, but certain pick-up trucks and sport utility vehicles may exceed the new limit.
The change is not indicative of any recent deterioration in the bridge’s physical condition. It remains safe, but should be used within the new posted load limits. All required signs are now posted, north and south of the bridge, establishing the new load limit.
The Houston Public Works and Engineering Department is exploring options for additional signage to better notify motorists of the new limits. The Houston Police Department will continue to monitor traffic in the area to assure the load limits are enforced. Additionally, the City of Houston will, initially, monitor bridge traffic using a donated camera to assess compliance with the new limits.
The Yale Street Bridge is on a TxDOT prioritized list for statewide funding for replacement, with construction anticipated to start in late 2016. In the meantime, the Houston Public Works and Engineering Department will continue to routinely inspect the bridge for any change in conditions and intends to perform low-cost rehabilitative actions that will allow the bridge load restrictions to be raised back to those previously posted.
With the completion of Koehler between Heights and Yale, there is now an easy alternative route around the Yale Street Bridge via the Heights Boulevard Bridge for northbound and southbound truck traffic. The Heights Boulevard Bridge does not have load limits.
For more information contact Alvin Wright at Alvin.firstname.lastname@example.org.